The radio cannot reach the network
Check the network status shown on the device and whether other devices at the same location can connect. Ask the account administrator to review the service and network configuration.
Over 25 YEARS in the Two-Way Radio Industry!
Canadian model support
Find Motorola TLK110 manuals, setup steps and Canadian support in one place.
Source: Motorola TLK110 user guide. See Getting Started; Status Indicators; Calls.
WAVE PTX devices use account and talkgroup configuration. Ask your account administrator to check that this device is assigned to the intended user and groups, that service is active and that the configured network is available. Do not enter conventional radio channel frequencies as a substitute for account setup.
Check the network status shown on the device and whether other devices at the same location can connect. Ask the account administrator to review the service and network configuration.
Select the assigned talkgroup, then confirm group membership with the WAVE PTX administrator.
Hold PTT and wait for the Talk Permit Tone to end before speaking. Release PTT to listen.
Hold the Power button to start the radio. Use the separate Volume Up and Volume Down buttons to set the listening level.
Select an assigned talkgroup on the Motorola TLK110, hold PTT and wait for the Talk Permit Tone before speaking. Release PTT to listen.
Check the Motorola TLK110 network status and ask your WAVE PTX administrator to confirm the device assignment, active service and talkgroup membership. Record any error message when contacting Canadian support.
Confirm the radio model and accessory part number before choosing microphones, mounting equipment or other additions.
View Motorola TLK110 in Canada
Ask about programming, fleet quotes or an existing order. Include the affected model and your order number for an order enquiry. Call 1-800-681-8023.