Canadian model support

Motorola BPR50dX Manuals and Support

Find Motorola BPR50dX documentation, setup guidance and the Canadian buying page in one place.

Shop Motorola BPR50dX in Canada

What do you need help with?

Start setup →Configure the radio →Find a document →Fix a problem →

Quick start

With the radio off, check that the correct battery and antenna are fitted. Charge using the authorized equipment and the instructions in the matching user guide.
Turn the On/Off/Volume knob clockwise until it clicks; then set the listening volume.
Rotate the Channel Selector knob to a programmed channel. Use a configured Zone button only if your radio administrator has enabled that function.
Press and hold PTT. Wait for the Talk Permit Tone if enabled, speak clearly into the microphone, then release PTT to listen.

Source: Motorola BPR50dX user guide. See 11–23.

Programming and fleet setup

Identify the exact model and selected configuration. If you are expanding a fleet, send the current model numbers and programming details to our team so compatibility can be checked before you order.

BPR50dX channel and button behaviour is set in its configuration. Give your radio administrator the intended group, existing fleet details and desired button assignments before changing the radio setup.

Ask the Canadian team about setup

Documents

Download the Motorola BPR50dX user guide PDF

Troubleshooting

The BPR50dX sounds an error on a channel

The selected channel may not be programmed. Return to the assigned channel and ask your radio administrator to check the channel plan.

The USB-C charging light flashes white

The manual identifies a flashing white LED as a USB-C charging fault. Stop and check the authorized charging equipment and contact support if the fault continues.

The BPR50dX cannot make a call on a busy channel

Wait for the channel to become available before pressing PTT again. A busy tone can mean the radio is preventing a transmission over another call.

Frequently asked questions

How do I select a BPR50dX channel?

Rotate the Channel Selector knob to a programmed channel. A channel announcement depends on the radio configuration; an unprogrammed channel produces an error tone.

Does the BPR50dX need to be turned off for charging?

Yes. Motorola’s BPR50dX user guide instructs users to turn the radio off when charging and use an authorized charger.

What does a flashing white BPR50dX light mean?

A flashing white LED indicates a USB-C charging fault. Check the authorized charging equipment and ask the Canadian support team for help if the fault continues.

Compatible accessories

Use the accessories linked from the Canadian product page. Confirm the radio model, connector and battery or charger part number before adding equipment to an existing system.

Check accessory compatibility with our Canadian team